Introduction
Water management has always been a critical aspect of modern living. As technology evolves, so does our ability to improve water management systems. Smart Pump Controllers are a game-changer in this field, offering a host of features that make them highly efficient and user-friendly. In this post, we will explore the key features of Smart Pump Controllers and how they can benefit your water management needs.
Full LED Status Display
Smart Pump Controllers come with a full LED status display, allowing users to quickly and easily monitor the device’s status at a glance. This feature ensures that you can always keep track of your pump’s performance, making it easy to identify and address any issues that may arise.
Intelligent Mode
The intelligent mode combines both flow switch and pressure switch controls to start and stop the pump. The startup pressure can be adjusted within a range of 0.5-5.0 bar (factory setting at 1.6 bar). Under normal usage, the controller operates in flow control mode. When the flow switch is constantly open, the controller automatically switches to pressure control mode upon restarting (indicated by a flashing intelligent mode light). If any malfunctions are resolved, the controller reverts to flow control mode automatically.
Water Tower Mode
Water tower mode allows users to set a countdown timer for the pump to cycle on and off at intervals of 3, 6, or 12 hours. This feature helps conserve energy and ensures that water is efficiently circulated throughout the system.
Water Shortage Protection
To prevent damage to the pump, Smart Pump Controllers are equipped with water shortage protection. If the water source is empty and the pressure in the pipe is lower than the startup value with no flow, the controller will enter a protective shutdown state after 2 minutes (with an optional 5-minute water shortage protection setting).
Anti-Locking Function
To prevent the pump impeller from rusting and getting stuck, the Smart Pump Controller features an anti-locking function. If the pump is not used for 24 hours, it will automatically rotate once to keep the impeller in good working condition.
Flexible Installation
Smart Pump Controllers can be installed at any angle, providing unlimited options for positioning the device to best suit your needs.
Technical Specifications
With a powerful 30A output, the controller supports a maximum load power of 2200W, operates at 220V/50Hz, and can handle maximum usage pressure of 15 bar and maximum withstand pressure of 30 bar.
Rooftop Water Tower/Tank Solution
For buildings with rooftop water towers or tanks, it is recommended to use a timer/water tower circulation water replenishment mode. This eliminates the need for unsightly and unsafe cable wires with float switches or water level switches. Instead, a float valve can be installed at the water outlet.
Conclusion
Smart Pump Controllers offer a wide range of features that make them indispensable for efficient water management. From intelligent mode operation to water shortage protection and flexible installation options, these devices are designed to make water management easier, safer, and more efficient. Invest in a Smart Pump Controller today to experience the difference for yourself.
Post time: Apr-11-2023