XDB315 Pressure Transmitter – User Manual and Installation Guide

The XDB315 Pressure Transmitter is a high-performance sensor designed for use in the food, beverage, pharmaceutical, and biotechnology industries. This article provides a user manual and installation guide for the XDB315 Pressure Transmitter.

Overview

The XDB315 Pressure Transmitter features a full-metal flat diaphragm and direct welding of the process connection, ensuring precise connection between the process connection and the measuring diaphragm. The stainless steel 316L diaphragm separates the measuring medium from the pressure sensor, and the static pressure from the diaphragm to the resistive pressure sensor is transmitted through a filling liquid approved for hygiene.

Wiring Definition

Refer to the image for wiring definition.

Installation Method

When installing the XDB315 Pressure Transmitter, follow these guidelines:

Choose a location that is easy to operate and maintain.

Install the transmitter as far away as possible from any sources of vibration or heat.

Connect the transmitter to the measuring pipeline through a valve.

Tighten the Hirschmann plug seal, screw, and cable tightly during operation (see Figure 1).

Safety Precautions

To ensure safe operation of the XDB315 Pressure Transmitter, follow these precautions:

Handle the transmitter with care during transportation and installation to avoid damage to the components that could affect the circuit’s performance.

Do not touch the isolation diaphragm in the transmitter’s pressure inlet with foreign objects (see Figure 2).

Do not rotate the Hirschmann plug directly, as this could cause a short circuit inside the product (see Figure 3).

Strictly follow the wiring method to avoid damaging the amplifier circuit.

In conclusion, the XDB315 Pressure Transmitter is a high-performance sensor designed for use in various industries. By following the user manual and installation guide, users can ensure the safe operation and accurate readings of the sensor. If you encounter any problems during installation or use, please contact the manufacturer for assistance.