-
XDB1219-5 Series Thermal flow switch
Thermal flow switches use precision electronic components widely used in aviation and automobiles, and reliable and stable circuit design, making the flow signal more accurate and stable. They are currently widely used in the steel, metallurgy, pharmaceutical, chemical and other industries.
-
XDB1219-2A Series Thermal flow switch
Thermal flow switches use precision electronic components widely used in aviation and automobiles, and reliable and stable circuit design, making the flow signal more accurate and stable. They are currently widely used in the steel, metallurgy, pharmaceutical, chemical and other industries.
-
XDB1213-2 Series Conductivity Controller
Conductivity is a parameter used to describe the ease with which electric charge flows in a substance. In the formula, conductivity is represented by the Greek letter σ. The standard unit of conductivity σ is Siemens/meter (abbreviated as S/m), which is the reciprocal of resistivity ρ, that is, σ=1/ρ.
When 1 ampere (1 A) current passes through the cross-section of an object and there is a voltage of 1 volt (1 V), the conductivity of the object is 1 S. Siemens is actually equivalent to 1 ampere/volt. If G is the conductivity (unit Siemens), I is the current (unit ampere), and U is the voltage (unit volt), then: G = I/U
The conductivity σ can be calculated by the conductivity G, the cross-sectional area of the conductor A, and the length of the conductor l: σ = Gl/A
-
XDB1212-1 Series PH controller
The PH controller is used to measure PH. The PH measurement value can be used to control the dosing. This controller/transmitter can be used as a monitor in water treatment, electrolysis water purification, chemical process, food process, water purification or sewage control.
-
XDB1210-7A Series Conductivity Sensor
Water quality analysis conductivity sensor is an important device used to measure the conductivity of water. The conductivity sensor uses two electrodes inserted into the water and calculates the conductivity of the water by measuring the resistance between the electrodes. The higher the ion concentration in the water, the stronger the conductivity and the greater the conductivity.
-
XDB1210-5 Series Conductivity Sensor
Water quality analysis conductivity sensor is an important device used to measure the conductivity of water. The conductivity sensor uses two electrodes inserted into the water and calculates the conductivity of the water by measuring the resistance between the electrodes. The higher the ion concentration in the water, the stronger the conductivity and the greater the conductivity.
-
XDB1207-1 Series ORP Sensor
Water quality analysis ORP (oxidation reduction potential) sensors are important devices used to measure the redox capacity of water. ORP sensors determine the redox potential of water by measuring the potential difference between an electrode and a reference electrode. This potential difference reflects the relative strength of oxidants and reductants in water, thus allowing the redox state of the water to be assessed.
-
XDB1203-3G Series PH Sensor
Water quality analysis PH sensor is an important device used to measure the acidity and alkalinity of water. It usually uses an electrochemical system composed of a glass electrode and a reference electrode to measure the concentration of hydrogen ions in water and then determine the PH value. When the sensor is immersed in water, the special membrane on the surface of the glass electrode responds to the hydrogen ions in the water. By measuring the potential difference between the electrodes, and then through specific conversion and calculation, the accurate PH value is obtained.
-
XDB1203-1A Series PH Sensor
Water quality analysis PH sensor is an important device used to measure the acidity and alkalinity of water. It usually uses an electrochemical system composed of a glass electrode and a reference electrode to measure the concentration of hydrogen ions in water and then determine the PH value. When the sensor is immersed in water, the special membrane on the surface of the glass electrode responds to the hydrogen ions in the water. By measuring the potential difference between the electrodes, and then through specific conversion and calculation, the accurate PH value is obtained.
-
XDB804 Series Thermal Gas Mass Flow Meter
The XDB804 series thermal gas mass flow meter from XIDIBEI SENSOR & CONTROL is based on the principle of heat diffusion, using a constant temperature difference method to accurately measure gas flow. It offers high precision, easy installation, and a compact design, making it suitable for various gases except acetylene. The meter is ideal for applications such as compressed air, natural gas in boiler rooms, and gas leak detection. It supports both 4-20mA and RS485 output signals and is designed to operate in harsh environments, with a wide temperature range from -40℃ to 220℃.
-
XDB803 Series Turbine flow meter
The XDB803 series turbine flow sensor (hereinafter referred to as the sensor) is based on the principle of moment balance and belongs to the velocity flow meter. The sensor has the characteristics of simple structure, light weight, high accuracy, good repeatability, sensitive response, easy installation, maintenance and use, etc. It is widely used in petroleum, chemical, metallurgy, water supply, papermaking and other industries. It is an ideal instrument for flow measurement and energy saving. The sensor is used in conjunction with the display instrument and is suitable for measuring liquids in closed pipes that are not corrosive to stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, and hard alloy, and are free of impurities such as fibers and particles. If it is matched with a display instrument with special functions, quantitative control and over-quantity alarm can also be performed. The explosion-proof type (ExmIIT6) of this product can be used in an environment with explosion hazards.
The sensor is suitable for media with a viscosity of less than 5×10*m²/s at working temperature. For liquids with a viscosity greater than 5×10-°m²/s, the sensor must be calibrated with real liquid before use. If the user requires a special type of sensor, the order can be negotiated. If an explosion-proof sensor is required, please indicate it in the order.
-
XDB507 Series Split type ultrasonic level meter
The instrument has a brand-new signal processing technology, with the characteristics of safety, cleanliness, high accuracy, long life, stability and reliability, convenient installation and maintenance, and simple reading. It is widely used in petroleum, chemical industry, water treatment, water conservancy, steel, coal mine, electric power and food processing industries, and is suitable for various fields such as acid, alkali, salt, anticorrosion, high temperature and explosion protection. It can be connected with various brands of PLC systems or secondary control systems through 4~20mA or RS485 (Modbus protocol) to provide real-time liquid level data for industrial automation.
