XDB1001-8 Series Soil parameter rapid tester

Short Description:

The soil rapid tester is a rapid tester developed by our company for rapid detection of soil temperature, moisture content, EC conductivity, PH and other parameters. The rapid tester adopts a hand-held design, which is convenient for users to carry. The probe adopts a needle-shaped probe design and is made of stainless steel, which has good corrosion resistance and toughness. The rapid tester uses FDR technology to measure soil moisture and AC detection technology to measure EC conductivity. The product has high measurement accuracy and fast response speed. The soil fertility is indirectly reflected by measuring the conductivity content in the soil, so as to infer the trend of nitrogen, phosphorus and potassium content. The low-power LCD screen is used to display the measured values, which is concise and clear. The product is powered by three ordinary ordinary No. 5 batteries, which are easy to replace. The overall low-power design of the product can be used continuously for up to two years with three No. 5 batteries.

Send email to us

Product Detail

Product Tags

Features

1.This sensor is designed with compact size
2.High measurement accuracy, fast response speed and good interchangeability
3.Good sealing, can be directly buried in the soil and is not corroded
4.The soil quality has little influence and the application area is wide
5.Accurate measurement, reliable performance, ensuring normal operation and high data transmission efficiency

Typical applications

Suitable for soil moisture monitoring, scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, grassland pastures, soil rapid testing, plant cultivation, sewage treatment, precision agriculture and other occasions for temperature, humidity, conductivity, and pH value testing.

Parameters

Dimensions(mm)

How to use

At the place where measurement is required, insert the alloy probe of the rapid tester vertically into the soil and press a button to start measurement. As shown in the figure:

After pressing the button, the device will start up in 1 second, then test for 2 seconds. For multi-element models, each element of the test result will be displayed for 3 seconds, and the screen will be turned off after 3 cycles. For single-element models, the test result will be displayed for 10 seconds before the screen is turned off. If the button is pressed again during the display process, the test will be repeated for 2 seconds and the display will be displayed again in a cycle