● Energy and water treatment system
● Intelligent loT constant pressure water supply
● Steel, light industry, environmental protection
● Household & commercial use constant water pump, air compressor pressure monitoring
● Medical, agricultural machinery and testing equipment
● Flow measurement equipment and irrigation system
Medium: Water
XDB407 industrial pressure transmitter designed for water process & treatment
● Specially used for water processing.
● Low cost & economical solutions to your project.
● All stainless steel structure, small and compact size, convenient to install and operate.
● High accuracy 0.5%.
● Integrated gland direct cable IP67 waterproof protection for outdoor use.
● Hirschman DIN43650C connector is optional.
● With a small buffer/damper/relief valve inside, effectively reduce instantaneous pressure caused by water flow or air to protect the pump.
● Provide OEM, flexible customization.
Attached is the 3D drawing of the XDB407 for a closer look.
XDB407 industrial water processing pressure sensor sender transmitter.
Pressure range | 0~10 bar / 0~16 bar/ 0~25 bar | Long-term stability | ≤±0.2% FS/year |
Accuracy | ±0.5% FS or others | Response time | ≤3ms |
Input voltage | DC 9~36V(24V) | Overload pressure | 150% FS |
Output signal | 4-20mA(2 wire)/0-10V(3 wires), 0.5-4.5V, 0-5V, 1-5V etc. Can be customized | Burst pressure | 300% FS |
Thread | G1/4 | Cycle life | 500,000 times |
Electrical connector | Hirschmann(DIN43650C) M12(3PIN)/Gland direct cable | Housing material | 304 Stainless steel |
Operating temperature | -40 ~ 85 ℃ | Protection class | IP65/IP67 |
Compensation temperature | -20 ~ 80 ℃ | ||
Operating current | ≤3mA | Explosion-proof class | Exia II CT6 |
Temperature drift (zero&sensitivity) | ≤±0.03%FS/ ℃ | Weight | ≈0.25kg |
Insulation resistance: >100 MΩ at 500V
1.5-year warranty
E . g . X D B 4 0 7 - 1 6 B - 0 1 - 2 - A - G 1 - W 3 - b - 0 1 - W a t e r
1 |
Pressure range | 16B |
M(Mpa) B(Bar) P(Psi) X(Others on request) | ||
2 |
Pressure type | 01 |
01(Gauge) 02(Absolute) | ||
3 |
Supply voltage | 2 |
0(5VCD) 1(12VCD) 2(9~36(24)VCD) 3(3.3VCD) X(Others on request) | ||
4 |
Output signal | A |
A(4-20mA) B(0-5V) C(0.5-4.5V) D(0-10V) E(0.4-2.4V) F(1-5V) G(I2C) X(Others on request) | ||
5 |
Pressure connection | G1 |
G1(G1/4) G2(G1/8) G3(G1/2) X(Others on request) | ||
6 |
Electrical connection | W3 |
W1(Gland direct cable) W3(M12(3PIN)) W5(Hirschmann DIN43650C) X(Others on request) | ||
7 |
Accuracy | b |
b(0.5% FS) c(1.0% FS) X(Others on request) | ||
8 |
Paired cable | 01 |
01(0.3m) 02(0.5m) 05(3m) X(Others on request) | ||
9 |
Pressure medium | Water |
X(Please note) |
Notes:
1) Please connect the pressure transmitter to the opposite connection for different electric connector. If the pressure transmitters come with cable, please refer to the right color.
2) If you have other requirements, please contact us and make notes in the order.