XDB801 Series Electromagnetic Flow Meter

Short Description:

Electromagnetic flow meter is composed of the sensor and converter, and the sensor consists of measuring tube electrodes, excitation coils, iron core and shell and other components. After the traffic signal is amplified, processed and operated by converter, you can see the instantaneous flow, cumulative flow, output pulse, analog current and other signals for the measurement and control of fluid flow.
XDB801 series electromagnetic flow meter adopts the smart converter so that it not only has the measurement, display and other functions, but also supports the remote data transmission wireless remote control, alarm and other functions.
XDB801 series Electromagnetic Flow Meter is suitable for the conductive medium whose conductivity is more that 30μs/cm, and it not only has a wide nominal diameter range, but also adapts to various actual environmental conditions.

Send email to us

Product Detail

Product Tags

Features

1.Excellent measurement repeatability and linearity
2.Good reliability and anti-interference performance
3.Good pressure resistance sealing ability
4.Low pressure loss measurement tube
5.Highly intelligent & Maintenance-free

Typical applications

Electromagnetic flow meter is a kind of speed meter which has a high accuracy and reliability and is widely used in petroleum, chemical engineering, steel, food, electricity, paper, water treatment, water supply, heat supply,environmental protection and other industries.

Parameters

The selection of electromagnetic flow meter should be clear as follows:

(1) The measured medium must be a conductive fluid, for gas, oil, organic solvents and other non-conductive medium can not be measured.

(2) The measuring range of the electromagnetic flow meter should be provided to the manufacturer when ordering the model and specification, and the manufacturer should calibrate in this measuring range to ensure the measuring accuracy of the instrument.

(3) The user shall provide the parameters in the selection table, such as the measured medium, process parameters,flow rate and working temperature and pressure, to the manufacturer, and choose the right flow meter according to these parameters.

(4) Optional separate type electromagnetic flow timing, the user according to the converter installation position to the sensor distance, put forward the length of wiring requirements to the factory.

(5) If the user needs to install accessories, such as supporting flange, metal ring pad, bolts, nuts, washers and and other additional requirements, can be put forward when ordering.