XDB102-2 Flush Diaphragm Pressure Sensor

Short Description:

XDB102-2(A) series flush diaphragm pressure sensors adopt MEMS silicon die, and combined with our company’s unique design and production process. The production of each product has adopted strict aging, screening and testing processes, to ensure excellent quality and high reliability, and to provide high-quality products for the long-term use of customers.

The product uses flush membrane thread installation structure, easy to clean, high reliability, suitable for food, hygiene or viscous medium pressure measurement.

Send email to us

Product Detail

Product Tags

Features

● CE conformity.

● Range: -100kPa…0kPa～20kPa…35MPa.

● Wide temperature compensation 0℃~70℃.

● 2 times overload pressure.

● Provide OEM, flexible customization.

● G1/2, NPT1/2, M20*1.5 various pressure connection.

Typical Applications

● Typically for using in chemical & process engineering, food industry, and pulp & paper and mining.

application in Hydraulic and pneumatic control systems

industrial pressue measurement of gas liquids and steam

Technical Parameters

Structure condition
Rear thread	M24*1 Internal thread		Housing/Diaphragm material	SS 316L
Pin wire	Gold-plated karaf/100mm silicone rubber wire		Back pressure tube	SS 316L (gauge and negative pressure only)
Seal ring	Nitrile rubber
Electrical condition
Power supply	≤2.0 mA DC		Impedance input	3kΩ ~ 6 kΩ
Impedance output	4kΩ ~ 6 kΩ		Response	(10%～90%) :<1ms
Insulation resistance	100MΩ,100V DC		Over pressure	2 times FS, ( 0C/0B/0A/02 5times FS)
Environment condition
Media applicability	Fluid that is not corrosive to stainless steel and nitrile rubber	Shock		No change at 10gRMS, (20～2000)Hz
Impact	100g, 11ms	Position		Deviate 90° from any direction, zero change ≤ ±0.05%FS
Basic condition
Environment temperature	(25±1)℃	Humidity		(50%±10%)RH
Atmospheric pressure	(86~106) kPa	Power supply		(1.5±0.0015) mA DC
All tests are in accordance with relevant national standards, including GB/T2423-2008, GB/T8170-2008, GJB150.17A-2009, etc., and also comply with the Company's "Pressure Sensor Enterprise Standards" provisions of the relevant content.

specifications of the XDB 102-2 pressure sensor module

Flush Diaphragm Pressure Sensor Electrical Connection

Electrical connection

Wire color

Ordering Information

XDB102-2（A）
	Range code	Measurement range	Pressure type	Range code	Measurement range	Pressure type
	0B	0~20kPa	G	10	0~1MPa	G / A
	0A	0~35kPa	G	12	0~2MPa	G / A
	02	0~70kPa	G	13	0~3.5MPa	G / A
	03	0~100kPa	G / A	14	0~7MPa	A / S
	07	0~200kPa	G / A	15	0~15MPa	A / S
	08	0~350kPa	G / A	17	0~20MPa	A / S
	09	0~700kPa	G / A	18	0~35MPa	A / S

		Code	Pressure type
		G	Gauge pressure
		A	Absolute pressure
		S	Sealed gauge pressure
			Code	Electrical connection
			1	Gold-plated kovar pin
			2	100mm Silicone rubber leads
				Code	Other specifications
				C1	M20*1.5 External thread
				C3	G 1/2 External thread
				Y	Gauge pressure type can be used to measure negative pressure ^①
XDB102-2(A) -03-G-1-3 the whole spec