1. Water tower mode: Flow switch +pressure sensor double control shutdown. After turning off the faucet, the shutdown value (pump head peak) will be generated automatically, and the starting time range can be set as 99 hours and 59 minutes.
2. Water shortage protection: When there is no water in the inlet water source and the pressure in the tube is less than 0.3 bar, it will enter the protection state of water shortage and shutdown after 8 seconds (5 minutes water shortage protection is optional).
3. Anti-jam machine function: lf the pump do not use for 24 hours, will run 5 seconds around in case of the motor impeller rust stuck.
4. Installation angle: unlimited, can be installed at any angle.
5. There is a water tower/pool on the roof, please use the timing/water tower cycle mode.
No need to use cable float switch, cable water level switch, ugly and unsafe, floating ball valve can be installed at the outlet
● Electronic pressure switch for water system.
● Turn the pump on accordingly when the pressure is low(tap turned on) or turn the pump off accordingly when the flow stops(tap turned off) at peak pump pressure standard.
● Replace the traditional pump control system composed of pressure switch, pressure tank check valve,etc.
● Water pump can be automatically stopped when water is scarce.
● It can be configured according to user requirements.
● Application: self-priming pump,jet pump,garden pump, clean water pump,etc
● Water shortage protection: When there is no water in the inlet water source cand the pressure in the tube is less than 0.3 bar, it will enter the protection state of water shortage and shutdown after 8 seconds (5 minutes water shortage protection is optional).
● Anti-jam machine function: lf the pump do not use for 24 hours, will run 5 seconds around in case of the motor impeller rust stuck.
● Installation angle: unlimited, can be installed at any angle.
● There is a water tower/pool on the roof, please use the timing/water tower cycle mode.
● No need to use cable float switch, cable water level switch, ugly and unsafe, floating ball valve can be installed at the outlet.
Maximum power | 2.2KW | Starting pressure | 0-9.4 bar |
Maximum rated current | 30A | Permissible maximum pressure | 15 bar |
Thread interface | G1.0" | Wide amplitude voltage | 170-250V |
Frequency | 50/60HZ | Maximum medium temperature | 0~ 100°C |
Protection class | IP65 | Packing number | 20 |